ГОСТ Р 59997—2022
[126]
Idriss, I.M. and Boulanger, R.W., Semi-empirical Procedures for Evaluating Liquefaction Potential During Earth
quakes, Proc. of the 11th International Conference on Soil Dynamics and Earthquake Engineering (ICSDEE) and
the 3rd International Conference on Earthquake Geotechnical Engineering (ICEGE), Berkley, California, pp. 32—56,
2004
[127]
Dean, E.T.R., Some Potential Approximate Methods for the Preliminary Estimation of Excess Pore Water Pressures
and Settlement-Time Curves for Submerged Foundations subjected to Time Dependent Loading, Cambridge
University Engineering Department, CUED/D-Soils/TR240, 1991
[128]
Sweeney, M., Webb, R.M. and Wilkinson, R.H., Scour around jackup rig footings, Proc. 20th Offshore Technology
Conference, OTC 5764, Houston, 1988
[129]
Whitehouse, R.J.S., Scour at marine structures, Thomas Telford Publications, London, 1998
[130]
Rudolph, D., Arnout, C., Bos, K.J. and Rietema, K., Scour around spudcans — analysis of field measurements, The
Fifteenth International Offshore and Polar Engineering (ISOPE) Conference Korea, 2005
[131]
McDowell, D.M and O’Connor, B.A., Hydraulic behaviourof estuaries, Civil engineering hydraulics series, Macmillan,
London, 1977
[132]
Siciliano, R., Hamilton, J., Murff, J. and Phillips, R., Effect of jackup spud cans on piles, Proc. 22nd Offshore
Technology Conference, OTC6467, Houston, 1990
[133]
Stewart, D., Influence of jack-up operation adjacent to a piled structure, Proc. Int. Symposium on Frontiers in
Offshore Geotechnics, Taylor and Francis, 2005
[134]
Leung, C., Xie, Y. and Chow, Y.K., Centrifuge Model Study of Spudcan-pile Interaction, Proc. Sixteenth International
Offshore and Polar Engineering Conference, San Francisco, California, USA, May 28—June 2, 2006
[135]
Kellezi, L., Kudsk, G. and Hansen, P.B., FE Modelling of Spudcan — Pipeline Interaction, in Gourvenec, S. and
Cassidy, M. (Eds.), ISFOG 2005: Proc. 1st Int. Symp. Frontiers in Offshore Geotechnics, University of Western
Australia, Perth, 19—21 September 2005, Taylor and Francis, London, pp. 551—557, 2005b
[136]
US Department of the Interior Minerals Management Service, Notice to Lessees and Operators of Federal Oil, Gas and
Sulphur Leases and Pipeline Right of Way Holders in the Outer Shelf Gulf of Mexico OCS Region, Shallow Hazard
Requirements, NTL 2008-G05, April 1, 2008 (or its latest replacement)
[137]
OGP, Geohazards from seafloor instability and mass flow, The International Association of Oil and Gas Producers,
London, Report No. 425, December 2009
[138]
Lysmer, J. and Richart, F. E., Dynamic Response of Footings to Vertical Loading, J. Soil Mec. and Found. Div.,
92(SM1) 65—91, 1966
[139]
Det Norske Veritas, Structural Design of Self Elevating Units, (LRFD Method), DNV-OS-C104, Oslo, October 2007
[140]
Det Norske Veritas, Fatigue Design of Offshore Steel Structures, DNV-RP-C203, April 2008
[141]
American Bureau of Shipping (ABS), Guide for the FatigueAssessment of Offshore Structures, ABS 115, April 2003a
[142]
American Bureau of Shipping (ABS), Commentary on the Guide for the FatigueAssessment of Offshore Structures,
ABS 115, April 2003b
[143]
Health and Safety Executive (HSE), Background to New Fatigue Guidance for Steel Joints and Connections in
Offshore Structures, OTH92 390, December 1999
[144]
Health and Safety Executive (HSE), Steels, ОТО 2001:015, 2001
[145]
American Institute for Steel Construction (AISC), Specification for Structural Steel Buildings, 13th Edition, ANSI/
AISC 360-05, March 2005
[146]
BS 5400-3:2000Мосты стальные, бетонные и композитные. Практическое руководство по проектиро
ванию стальных мостов (Steel, concrete and composite bridges. Code of practice for de
sign of steel bridges)
[147]
Det Norske Veritas, Buckling Strength Analysis of Bars and Frames, and Spherical Shells, DNV Classification Note
30.1, Oslo, April 2004
[148]
American Petroleum Institute (API), Stability Design of Cylindrical Shells, API Bulletin 2U, June 2004
[149]
Galambos, T.V., Guide to stability design criteria for metal structures, 5th Ed. J. Wiley and Son, 1998
[150]
EN 1993-1-1:2005 Еврокод 3. Проектирование стальных конструкций. Часть 1-1. Основные правила и
правила для зданий (Eurocode 3: Design of steel structures — Part 1-1: General rules and
rules for buildings)
[151]
Dyer, A.P., Plastic Strength Interaction Formulae for Jack-Up Chords, MSc Thesis, Dept of Mechanical Engineering,
Univ. of Sheffield, Nov. 1992
254