ГОСТ Р 59997—2022
[25]Sarpkaya, Т. and Isaacson, М., Mechanics of Wave Forces on Offshore Structures, Van Nostrand Reinhold Company,
1981
[26] Taylor, P.H., Current Blockage — Reduced Forces on Offshore Space-Frame Structures, Proc. 23rd Offshore
Technology Conference, OTC 6519, Flouston, May 1991
[27] Kirby, J.T. and Chen, T.S., Surface waves on vertically sheared flows: approximate dispersion relations, J. Geophys
ical Research, Vol. 94, no. C1, pages 1013—1027, January 15, 1989
[28]
Martin, C., Physical and numerical modelling of offshore foundations under combined loads, DPhil Thesis, University
of Oxford, 1994
[29] Hossain, M.S. and Randolph, M.F, New mechanism-based design approach for spudcan foundations on single layer
clay, J. Geotech. Geoenviron. Eng. (ASCE), Vol. 135, No. 9, pp. 1264—1274, 2009a
[30]Skempton, A.W., The Bearing Capacity of Clays, Building Research Congress, London, pp. 180 189, 1951
[31]
Young, A.G., Remmes, B. and Meyer, B., Foundation Performance of Offshore Jack-Up Drilling Rigs, Journal of
Geotechnical Engineering, Vol. 110, No. 7, 1984
[32] Houlsby G.T. and Martin C.T., Undrained Bearing Capacity Factors for Conical Footings on Clay, Geotechnique,
Vol. 53, No. 5, pp. 513—520, 2003
[33] Menzies, D. and Roper, R., Comparison of Jack-up Rig Spudcan Penetration Methods in Clay, 40th Offshore
Technology Conference, OTC 19545, Houston, May 2008
[34]
Hansen, J.B., A Revised and Extended Formula for Bearing Capacity, Bulletin No. 28, Danish Geotechnical Institute,
Copenhagen, pp. 5—11, 1970
[35] Hossain, M.S., Randolph, M.F., Hu,Y., and White, D.J., Cavity Stabilityand Bearing Capacity of Spudcan Foundations
on Clay, 38th Offshore Technology Conference, OTC 17770, Houston, May 2006
[36] Finnie, I.M.S. and Randolph, M.F., Punch-through and liquefaction induced failure of shallow foundations on
calcareous sediments, 7th International Conference on Behaviour of Offshore Structures BOSS ‘94, Massachusetts,
pp. 217—230, 1994b
[37] Erbrich, C.T., Australian frontiers — spudcans on the edge, Keynote lecture, in Gourvenec, S. and Cassidy, M.
(Eds.), ISFOG 2005: Proc. 1st Int. Symp. Frontiers in Offshore Geotechnics, University of Western Australia, Perth,
19—21 September 2005, Taylor and Francis, London, pp. 49—74, 2005
[38] Martin, C.M., User guide forABC —Analysis of Bearing Capacity, Department of Engineering Science, University of
Oxford, Report No. OUEL 2261/03, 2003, available from www civil.eng.ox.ac.uk/people/cmm/software/abc/
[39] Poulos, H.G. and Chua, K.F.,Bearing capacity of foundations on calcareous sand, Proc. 11th Int. Conf. on Soil
Mechanics and Foundation Engineering, Vol. 3, pp. 1619—1622, 1985
[40]
LeTirant, P. and Nauroy, J.F., Design guides for offshore structures: foundations in carbonate soils, Editions Technip,
Paris, 1994
[41]
Finnie, I.M.S and Randolph, M.F., Bearing response of shallow foundations in uncemented calcareous soil, Proc. Int.
Conf. Centrifuge ‘94, Singapore, pp. 535—540, 1994a
[42]
Dutt, R.N. and Ingram, W.B., Bearing capacity of jack up footings in carbonate granular sediments, Proc. Int. Conf.
on Engineering for Calcareous Sediments, Perth, Vol. 1, pp. 291—296, 1988
[43] Pan, J., The behaviour of shallow foundations on calcareous soil subjected to inclined load, PhD Thesis, The
University of Sydney, 1999
[44]
Pan, J., Carter, J.P. and Airey, D.W., The influence of load inclination on the bearing capacity of a circular footing,
Proc. 8th Australia New Zealand Conf. on Geomechanics, Hobart, Vol. 1, pp. 299—305, 1999
[45] Byrne, B.W. and Houlsby, G.T., Observations of footing behaviour on loose carbonate sands, Geotechnique, Vol. 51,
No. 5, pp. 463—466, 2001
[46] Yeung, S.K. and Carter, J.P, An Assessment of the Bearing Capacity of Calcareous and Silica Sands, International
Journal for Numerical and Analytical Methods in Geomechanics, Vol. 13, pp. 19—26, 1989
[47]Houlsby, G.T., Evans, K.M. and Sweeney, M., End bearing capacity of model piles in layered carbonate soils, Proc.
Int. Conf. on Engineering for Calcareous Sediments, Perth, Australia, Balkema, Vol. 1, pp. 209—214, 1988
[48]
Sharp, D.E. and Van Seters, A.J., Results and evaluation of plate load test results, Proc. Int. Conf. on Engineering
for Calcareous Sediments, Perth, Australia, Vol. 2. Balkema, pp. 473—483, 1988
[49] Randolph, M.F. and Erbrich, C., Design of shallow foundations for calcareous sediments, Proc. 2nd Int. Conf. on
Engineering for Calcareous Sediments, Bahrain, pp.361—378, 1999
250