ГОСТ Р 8.904—2015
Ш
12
]
[
3
]
И]
(5)
[
6
]
[7]
[
8
]
[9]
110
]
ИЯ
[
12
]
[131
Библиография
ISO 14577-3Metallic materials — Instrumented indentation test for hardness and materials
parameters — Part 3: Calibration of reference blocks
Материалы металлические. Определение твердости и других параметров
материалов инструментальным методом вдавливания. Часть 3. Калибровка
контрольных образцов
ISO 376 Metallic materials — Calibration of force-proving instruments used for the verification
of uniaxial testing machines
Материалы металлические. Калибровка силомеров, применяемых для
верификации одноосных испытательных машин
ISO 14577-4 Metallic materials — Instrumented indentation test for hardness and materials
parameters —Part 4: Test method for metallic and поп-metallic coatings
Материалы металлические. Определение твердости и других параметров
материалов инструментальным методом вдавливания. Часть 4. Метод
испытания металлических и неметаллических покрытий
ISO/IEC Guide 98- Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in
nreasurement (GUM:1995)
Неопределенность измерения.Часть 3. Руководство по выражению
неопределенности измерения
Berkovich E.S. — Three faceted diamond pyramid for micro-hardness testing. — Industrial Diamond Review
11.— N* 127. June 1951
Chudoba T.. Schwarzer N.. Richter F. — Detemiination of elastic properties of thin films by indentation
measurements with a spherical indenter. — Surf. Coat. Technol.,127 (9). 2000
Doerner M.F. & Nix W.D. — A method for interpreting the data from depth-sensing indentation instruments. —
J. Mater. Res. — 1986. 1pp. 601—609
Herrmann K.. Jennett N.M., Wegener W.. Meneve J.. Hasche K.. Seemann R. — Progress in determination of
the area function of indenters used for nanoindentation. — Thin Solid Films. — 2000, 377-378 pp. 394—400
Jennett N.M.. Shafirslein G.. Saunders S.R.J. — A Comparison of indenter tip shape measurement sing a
calibrated AFM and indentation into fused silica. — VDI Bericht — 1194. VDI-Vertag GmbH Dusseldorf. 1995.
pp. 201—10
Meneve J.. Smith J.F.. Jennett N.M.. Saunders S.R.J. Applied Surface Science. 100/101 (1996) 64-68. Surface
Mechanical Property Testing by Depth Sensing Indentation. Proc. 13th Int. Vac. Conf. and 9th Int. Conf. Solid
Surfaces. Sept 25-29 1995 Yokohama. Japan
Oliver W.C. & Pharr G.M. — An improved technique for determining hardness and elastic modulus using load
and displacement sensing indentation experiments. — J. Mater. Res.— 7 (6). pp. 1564-1583. June 1992
Oliver W.C. & Pharr G.M. — An improved technique for the determining the hardness and elastic modulus using
load displacement sensing indentation experiments. — J Mater. Res. — 7. (1992) 1564-1583. Final Report EU-
SMT Project: Determination of Hardness and Modulus of Thin Films and Coatings by Nanoindentation
(INDICOAT). Contract No. SMT4-CT98-2249). NPL Report MATC(A) 24. May 2001
Petzold M„ Hagendorf C.. Fitting M.. Olaf J.M. — Atomare Rasterkraftmikroskopie an tndenterspitzen und
Harteeindruckan. —VDI Benchte. 1194. S. 97-108. VDI-VertagGmbH Dusseldorf. 1995
3:2008*
’ В Российской Федерации следует применять ГОСТ Р 54500.3—2011/Руководство ИСО/МЭК 98-3:2008
«Неопределенность измерения. Часть 3. Руководство по выражению неопределенности измерения».
25