ГОСТ Р ИСО 16063-22—2012
Библиография
(1) VON MARTENS. H.-J. Metrology and traceability of vibration and shock measurements. Handbook of Noise and
Vibration Control. Edit. Malcolm J. Crocker, Chapter 49a. John Wiley & Sons. New York
(2) TILLETT. J.P.A. A Study of the Impact on Spheres of Plates. Proceedings of the Physical Society. 1954. Section B. 67.
pp. 677—685
J3J EVANS. D.J. Testing the Sensitivity of Accelerometers Using Mechanical Shock Putses Under NIST — Special
Publication 250. Special Test No. 24040S. Proceedings of the 1995 International Mechanical Engineering Congress
and Exposition. San Francisco. CA, November 1995, pp. 12— 177
(4) SILL. R.D. ENDEVCO Automatic Acceleration Calibration System. Model 2925. Comparison Shock Calibrator (POP),
website:
http://www.endevco.com/
(5) DAVIES. R.A. Critical Study of the Hopkinson Pressure Bar. Philosophical Transactions. Series A. Royal Society of
London. 240. pp. 352—375. January 8.1948
(6) KOLSKY. H. Stress Waves in Solids. Oxford University Press. 1953
(7) SILL. R.D. Testing Techniques Involved with the Development of High Shock Acceleration Sensors. Endevco Tech.
Paper. TP 284. San Juan Capistrano. CA. 1983
(8) SILL. R.D. Shock Calibration of Accelerometers at Amplitudes to 100.000 G using Compression Waves. Endevco
Tech. Paper. TP 283. San Juan Capistrano. CA. 1983
(9) BATEMAN. V.I.. LEISHER. W.B., BROWN. F A. and DAVIE. N.T. Calibration of a Hopkinson Bar with a Transfer
Standard. Shock and Vibration. 1993. I.N o. 2. 1993. pp. 145— 152
(10) BATEMAN. V.I., HANSCHE. B O. and SOLOMON. O.M. Use of a Laser Doppler Vibrometer for High Frequency
Accelerometer Characterizations. Proceedings of the 66th Shock and Vibration Symposium. I. Biloxi. MS. November
1995
(11) TOGAMI. T.C.. BAKER. W.E. and FORRESTAL. M.J. A Split Hopkinson Bar Technique to Evaluate the Performance
of Accelerometers. Journal of Applied Mechanics. 1996. 63. pp. 353— 356
(12) TOGAMI. T.C.. BATEMAN. V.l. and BROWN. F.A. Evaluation of a Hopkinson bar Fly-away Technique for High
Amplitude Shock Accelerometer Calibration. Proceedings of the 68th Shock and Vibration Symposium. Vol. I. Hunt
Valley. MD. November 1997
(13) BATEMAN. V.l. and THATCHER. P.D. Certification of 200.000 g Shock Calibration Technique for Sensors. Journal of
the IEST. 45. 2002. pp. 121— 128
(14) LINK. A. VON MARTENS. H.-J. and WABINSKI W. New method for absolute shock calibration of accelerometers.
Proceedings of the 3rd International Conference «Vibration Measurements by Laser Techniques: Advances and
Applications». SPIE Volume 3411.1998
(15) MULLER. H. StoBfdrmige Kalibrierung von Beschleunigungsaufnehmern nach dem Vergleichsverfahren. Dissertation.
TU Braunschweig und Volkswagen AG Wolfsburg. 2001 (
http://opus.tu-bs.de/opus/volltexte/2001/227)
(16) ISO 5348. Mechanical vibration and shock — Mechanical mounting of accelerometers
(17) ISO 8042. Shock and vibration measurements — Characteristics to be specified for seismic pick-ups
(18) ISO 9001, Quality management systems — Requirements
(19) ISO 16063-11, Methods for the calibration of vibration and shock transducers — Part 11. Primary vibration caloratlon
by laser interferometry
(20) ISO 16063-12. Methods for the calibration of vibration and shock transducers — Part 12. Primary vibration caloratlon
by the reciprocity method
(21) ISO 16063-13:2001. Methods for the calibration of vibration and shock transducers — Part 13: Primary shock
calOration using laser interferometry
(22) ISO 16063-21. Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by
comparison to a reference transducer
(23) ISO/IEC 17025. General requirements for the competence of testing and calibration laboratories
21