ГОСТ OIMLR 76-1—2011
[17]Международный стандарт
МЭК 60068-2—78 (2001—08)
(МЭК60068-2—78взаменследующихстандартов:
МЭК 60068-2-3 испытание Са и
МЭК 60068-2-56. испытание СЬ)
(IEC 60068-2-78 replaces the following withdrawn
standards:
IEC 60068-2-3. test Ca and
IEC 60068-2-56. test Cb)
[18] Международный стандарт
МЭК 60068-3-4 (2001—08)
(19)Международный стандарт
ИСО 7637-1 (2002)
(ISO 7637-1 (2002))
(20)Международный стандарт
ИСО 7637-3 (2007) с поправкой 1 (1995)
(ISO 7637-3 (2007) with correction 1(1995))
(21]Международный стандарт
МЭК IEC 61000-4-4 (2004—07)
(IEC 61000-4-4 (2004—07))
(22]Международный стандарт
МЭК 61000-4-5 (2001—04) объединенное изда
ние 1.1 (включая приложение 1 и поправку 1)
(IEC 61000-4-5 (2001—04) consolidated edition 1.1
(Including Amendment 1 and Correction 1)
(23]Международный стандарт
МЭК 61000-4-2 (1995—01) с приложением 1
(1998—01) Объединенное издание:
IEC 61000-4-2 (2001—04) Иэд. 1.2. Эта публика
ция основана на IEC 60801-2 (второе издание:
1991)
(IEC 61000-4-2 (2001—04) (1995-01) with
amendment 1 (1998—01) Consolidated Edition:
IEC 61000-4-2 (2001-04) Ed. 1.2 This publication
is based on IEC 60801-2 (second edition: 1991)
(24]Международный стандарт
МЭК 61000-4-3 объединенное издание 2.1
(2002—09) с приложением 1 (2002—08)
(IEC 61000-4-3 consolidated Edition 2.1
(2002—09) with amendment 1 (2201—08)
(25]Международный стандарт
МЭК 61000-4-6 (2003—05) с приложением 1
(2004—10)
(IEC 61000-4-6 (2003—05) with amendment 1
(2004—10))
Environmental testing. Part 2-78: Tests — Test Cab:
Damp heat, steady state
Damp heat tests
Road vehicles— electrical disturbance from conduc
ting and coupling
Part 1: Definitions and general considerations
Road vehicles— electrical disturbance from conduc
ting and coupling
Part3: Passengercarsand lightcommercialvehicles
with nominal 12 V supply voltage and commercial
vehicles with 24 V supply voltage — Electrical tran
sient transmission by capacitive and inductive
coupling via lines other than supply lines
Electromagneticcompatibility(EMC)Part4-4:Testing
and measurement techniques — Electrical fast tran-
sienUburst immunity test
Electromagneticcompatibility(EMC)Part4-4:Testing
and measurement techniques — Surge immunity-
test
Basic EMC Publication Electromagnetic compatibility
(EMC) Part 4: Testing and measurement techniques
Section 2: Electrostatic discharge immunity test
Electromagnetic compatibility (EMC) Part 4: Testing
and measurement techniques Section 3: Radiated,
radio-frequency, electromagnetic field immunity test
Electromagnetic compatibility (EMC) Part 4: Testing
and measurement techniques Section 6: Immunity
toconducteddisturbances,inducedbyradio-frequen
cy fields
131