ГОСТ P EH 12354-5-2012
[32] EN 13141-5, Ventilation for buildings — Performance testing of comp onents/pro ducts
for residential ventilation —Part 5: Cowls and roof outlet terminal devices
[33] EN 13141-6, Ventilation for buildings— Performance testing of comp onents/pro ducts
for residential ventilation —Part 6: Exhaust ventilation system packages used in a
single dwelling
[34] EN 13141-7, Ventilation for buildings— Performance testing of comp onents/pro ducts
for residential ventilation — Part 7: Performance testing of a mechanical supply and
exhaust ventilation units (including heat recovery) for mechanical ventilation systems
intended for single family dwellings
[35] ISO 5135, Acoustics — Determination of sound power levels of noise from air-
terminal devices, air- terminal units, dampers and valves by measurements in a
reverberation room
[36] ISO 9611, Acoustics —Characterization of sources of structure-borne sound with
respect to sound radiation from connected structures — Measurement of velocity at
the contact points of machinery when resiliently mounted
[37] EN ISO 11546-1, Acoustics — Determination of sound insulation performances of
enclosures — Part 1: Measurements under laboratory conditions (for declaration
purposes) (ISO 11546-1:1995)
[38] EN 14366:2004, Laboratory measurement of noise from waste water installations
[39] EN 15657-1:2009, Acoustic properties of building elements and of buildings —
Laboratory measurement of airborne and structure-borne sound from service
equipment — Part 1: Simplified cases where the equipment mobilities are much higher
than the receiver mobilities, taking wirlpool baths as an example
[40] EN 13141-4, Ventilation for buildings — Performance testing of components/products
for residential ventilation — Part 4: Fans used in residential ventilation systems
[41] EN ISO 16032, Acoustics — Measurement of sound pressure level from service
equipment in buildings — Engineering method (ISO 16032:2004)
[42] EN ISO 5136, Acoustics — Determination of sound power radiated into a duct by
fans and other air- moving devices — In-duct method (ISO 5136:2003)
98