ГОСТ РМЭК 61850-6—2009
<EnumType kJ=’GnSt">
<EnumVal ord="r>Stopped</EnumVal>
<EnumVal ord="2">Stopping</EnumVai>
<EnumVal ord=’3">Started</EnumVal>
<ErvumVal ord="4">Slarting</EnumVal>
<EnumVal ord=’5">Disabled</EnumVal>
</EnumType>
<EnumType id="LevMocT>
<EnumVal ord=*1*>Positive or Rising<iEnumVal>
<EnumVal ord="2’>Negative or Falling</EnumVal>
<EnumVal ord=’‘3">Both</EnumVal>
<EnumVal ord=*4">Other</EnumVal>
</EnumType>
<EnumType id="LivDeaMod">
<Er>umVal ord=T>Dead Line. Dead Bus</EnumVal>
<EnumVal ord="2">Live Line. Dead Bus</EnumVal>
<EnumVal ord="3">Dead Line. Live Bus</EnumVal>
<EnumVal ord=’4">Dead Line. Dead Bus OR Live Line. Dead Bus</EnumVal>
<EnumVal ord="5">Dead Line. Dead Bus OR Dead Line. Live Bus</EnumVal>
<EnumVal ord=*6">Live Line. Dead Bus OR Dead Line. Live Bus</EnumVal>
<EnumVal ord=*7*>Dead Line. Dead Bus OR Live Line. Dead Bus OR Dead Line. Live
Bus<yEnumVal>
</EnumType>
<EnumType kf="PolQty*>
<EnumVal ord="1’>None</EnumVal>
<EnumVal ord="2">Zero Sequence Currenl</EnumVal>
<EnumVal ord="3">Zero Sequence Voltage</EnumVaJ>
<EnumVal ord="4“>Negative Sequence Voltage<.,EnumVal>
</EnumType>
<EnumType id="POWCap’>
<EnumVal ord=Hr>None</EnumVal>
<EnumVal ord=’2*>Close</EnumVal>
<EnumVal ord=’3">Open</EnumVal>
<EnumVal ord=*4*>Ctose and Open</EnumVal>
</EnumType>
<EnumType id=’OpMod">
<EnumVal ord=T>Overwrite existing values</’EnumVaI>
<EnumVal ord=“2">Stop when full or saturated</EnumVa>
</EnumType>
<EnumType id=*ReTrMod">
<EnumVal ord="1">Off<fEnumVal>
<EnumVal ord="2">Without Check</EnumVai>
<EnumVal ord="3">With Current Check</EnumVal>
<EnumVal ord="4">With Breaker Status Check<i’EnumVal>
<EnumVal ord=’5’>With Current and Breaker Status Check</EnumVal>
<EnumVal ord=*6*>Other Checks</EnumVal>
</EnumType>
<EnumType id=’RstMo(r>
<EnumVal ord="r>None</EnumVal>
<EnumVal ord=*2">Harmonic2<.’EnumVal>
<EnumVal ord=*3">Harmonic5</EnumVal>
<EnumVal ord="4">Harmonic2and5</EnumVal>
<EnumVal ord="5">WaveformAnalysis<>’EnumVal>
<EnumVal ord=*6“>WaveformAnalysisAndHarmonic2</EnumVal>
<EnumVal ord=*7">Other</EnumVal>
</EnumType>
<EnumType id=*RvAMod">
<EnumVal ord=T>Off</EnumVal>
<EnumVal ord=*2">On</EnumVal>
</EnumType>
<EnumType id="SchTyp">
<EnumVal ord="1*>None</EnumVal>
<EnumVal ord=*2">lntertrip</EnumVal>
117