S B
С. 33 ГОСТ 24642-81
1.25. Common axis
1.26. Common median plane
1.27. Nominal position
1.2S. Real position
. Deviation of position
. Tolerance of position
1.31. Tolerance zone of position
1.32. Projected tolerance zone
2.1.1. Straightness deviation in a plane
2.1.2. Straightness tolerance
2.1.3. Tolerance zone of straightness in a plane
2.1.6. Tolerance zone of straightness of an axis
2.2.1. Flatness deviation
2.2.2. Flatness tolerance
2.2.3. Flatness tolerance zone
2.3.1. Circularity deviation
2.3.2. Circularity tolerance
2.3.3. Circularity tolerance zone
2.4.1. Culindncity deviation
2.4.2. Cyhndricily tolerance
2.4.3. Cyhndricily tolerance zone
3.1.1. Parallelism deviation of asurface with reference to a datum surface
3.1.2. Parallelism tolerance
3.1.3. Tolerance zone of parallelism of a surface with reference to a datum surface
3.1.4. Parallelism deviation of a line with reference to a datum surface
3.1.5. Tolerance zone of parallelism of a line with reference to a datum surface
3.1.6. Parallelism deviation of a line with reference to a datum line in one plane
3.1.7. Tolerance zone of parallelism of a line with reference to a datum line in one plane
3.1.9. Tolerance zone of parallelism of a line with reference to a datum line
3.2.1. Perpendicularity deviation of a surface with reference to a datum surface
3.2.2. Perpendicularity tolerance
3.2.3. Tolerance zone of perpendicularity of a surface with reference to a datum surface
3.2.4. Perpendicularity deviation of a surface or line with reference to a datum line
3.2.5. Tolerance zone of perpendicularity of a surface or line with reference to a datum line
3.2.7. Tolerance zone of perpendicularity of a line with reference to a datum surface in the specified direction
3.2.8. Perpendicularity deviation of a line with reference to a datum surface
3.2.9. Tolerance zone of perpendicularity of a line with reference to a datum surface
3.3.1. Angularity deviation of a surface with a reference to a datum surface (or datum line)
3.3.2. Angularity tolerance
3.3.3. Tolerance zone of angularity of a surface with reference to a datum plane (or a datum line)
3.3.4. Angularity deviation of a line with a reference to a datum line (ora datum plane)
3.3.5. Tolerance zone of angularity of a line with reference to a datum line (or a datum plane)
3.4.1. Coaxiality deviation
3.4.2. Coaxiality tolerance
3.4.3. Coaxiality tolerance zone
3.5.1. Symmetry deviation
3.5.2. Symmetry tolerance
3.5.3. Symmetry tolerance zone
3.6.1. Positional deviation
3.6.2. Positional tolerance
3.6.3. Tolerance zone of position of a line in one plane
3.6.4. Tolerance zone of position of a line
3.6.5. Positional tolerance zone of median plane (line) in the specified direction
4.1.1. Radial run-out
4.1.2. Radial run-out tolerance
4.1.3. Tolerance zone of radial run-out
4.2.1. Axial run-out
4.2.2. Axial run-out tolerance
4.2.3. Tolerance zone of axial run-out
4.3.1. Circular run-out in a specified direction
4.3.2. Circular run-out tolerance in a specified direction
4.3.3. Tolerance zone of circular run-out in a specified direction
150